Orion-Tr Smart DC-DC Charger Isolated

The Orion-Tr Smart DC-DC charger is an adaptive 3-stage charger (bulk – absorption – float) designed for dual battery systems, such as in vehicles or on boats where the starter battery (hence the alternator) is used to charge the service battery. The name “Smart” comes from its built-in Bluetooth connection, where the charger can be monitored and configured via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism. This isolated model allows the input and output to have separate chassis grounds.

The Orion-Tr Smart charger can be used in 12V, 24V or 48V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power.

Suitable for high temperatures up to 55°C with a full rated output up to 40°C.

Description

Orion-Tr Smart Charger 12/12-30 (360W)

Input voltage range	8–17 V
Under voltage shut down	7 V
Under voltage restart	7.5 V
Nominal output voltage	12.2 V
Output voltage adjust range	10–15 V
Output voltage tolerance	+/- 0.2 V
Output noise	2 mV rms
Continuous output current (40°C)	30 A
Max output current	40 A
Short circuit output current	60 A
Continuous output power (25°C)	430 W
Continuous output power (40°C)	360 W
Efficiency	87%
No load input current	< 80 mA
Standby current	Less than 1 mA
Can be used as power supply	Yes (via Bluetooth)
Galvanic isolation	200 VDC (input, output, case)
Operating temperature	-20°C to +55°C
Humidity	Max 95%, non-condensing
DC connection	Screw terminals
Max cable size	16 mm² / AWG6
Weight	1.3 kg
Dimensions (h × w × d)	130 × 186 × 80 mm
Protection category	IP43 / IP22
Standards	EN 60950, EN 61000 series, ECE R10-5
enclosure-dimensions	Orion-Tr-Smart-Charger-Isolated-12V-24V-360W

Orion-Tr Smart DC-DC Charger Isolated

Description

Orion-Tr Smart Charger 12/12-30 (360W)

Related products

Inverter VE.Direct